Adjusting Fitment (Adapter, Larger Plug, Smaller Plug)

Description

Included here are items (an Adapter, a Larger Tensioning Plug, and a Smaller Tensioning Plug) that can be used to adjust the fitment of the standard MetaMoreFore (inner diameter of Set Rings, Blue = 23 mm)

• YOU MAY NEED AN ADAPTER IF…
• ISSUE: Glans slips up past the Bottom End Ring:
• SOLUTION: An Adapter (left in picture) that fits under the Bottom End Ring that helps to reduce its inner diameter from 23mm to 22mm.  This may seem like a very small difference, but for most restorers who have the issue, this adapter has solved the problem.

• YOU MAY NEED A LARGER PLUG IF…
• ISSUE: Tensioning Plug is too small gets pulled down inside the skin tube.
• SOLUTION: A larger Tensioning Plug (middle in picture; diameter: 20mm vs the standard 17mm) has resolved this issue for many who have had this problem.  For those who it has not, they needed a full larger set (please contact me if you experience this issue – we work to resolve it).

• YOU MAY NEED A SMALLER PLUG IF…
• ISSUE: Tensioning Plug is too big and it will not fit into the top of the skin tube.
• SOLUTION: A smaller Tensioning Plug (right in picture; diameter: 12 mm vs the standard 17mm) has resolved this issue for all those who have had this problem.

If you do not feel as though these items/options will resolve your issue, please contact me (Mel, metamorefore@gmail.com).  We have a full larger set that is custom order.